Optics & Electronics

The basic quality requirements for metal parts of Optic & Electrionic devices are aestetic appearance, smooth not defected surface and increased corrosion resistanse. Relatively loose dimension and tolerance demands are usualy defined. All these “simple” requirements are well achievable by Finish Line Electropolishing Processes.


Complicated cases of metal parts for Optics involved demands of high reflectivity and, espesially, a light beam free running and reflecting inside narrow inner channels of an optic device.
High reflection characteristics of electropolished surface may be easily reached, when the surface after machining is of acceptable smoothness, and a proper Electropolishing Process is chosen, subject to a metal the part made of. In one such case we run a long period lasted commercially aimed process with production rate of thousands units per day, for a range of optical reflectors sized from 5 to 100 mm.


In other case, we have faced a necessity of burrs removing and surface clearing inside geometrically complicated narrow parting inner channel, to enable light beam’s proper functioning. The task was solved through implementatiom of a many staged Electropolishing process.


In some special case, when a surface clearing was requested for a battery of tens inner optic channels, while requirements for low surface roghness was tough as well, the aimed quality parameters were achieved using special electrolyte, through many staged sequence of thorough controlled electropolishing process.
Manufacturers of electronic devices often seek for surface enhansing of parts made of Aluminum 026 and Copper.

Anode Treatment

Anode treatment beneficiates metal surface through metal dissolving and oxidation. In case no coating is allowed, Anode Treatment is a way to enhance your parts’ surface qualities. more >>

Passivation

Passivation is a classic anode treatment to improve corrosion resistance of metals, comparing to not treated parts, through completing natural formation of metal oxides surface layer. more >>

Bright Passivation

Bright Passivation improves corrosion resistance of metals, comparing to not treated parts, removes spots from previous processing and provides the parts with brighter appearance. more >>

Etching

Etching is an old craft which technically comprises a vigorous anode treatment process, widely exploited in industry. Etching metal surface as a whole makes it uniformly rough and porous more >>

Color Anodizing

Color Anodizing is a unique Titanium only applied process granting to metal surface a wide spectrum of controllable vivid interference colors, which are stable, uniform and repeatable more >>

Surface preparation

Surface preparation ensures the after Anode Treatment surface features as aimed. It includes both quality improving (like de-burring) and surface beneficiation (like surface roughening) more >>

Surface cleaning

Surface Cleaning is an essential completing operation after any Anode Treatment intended washing the surface from leftovers of previous treatment, using purified water at the end step more >>

Clean Room Packing

Packing in Clean Room class 1000 with laminar cameras class 100 allows us to implement packaging procedure for customers’ products having the highest cleanness requirements more >>