Abrasive Blasting

Finish Line operates two programmed blasting machines, semi-automatic and automatic ones, with capacity of hundreds implants per hour. Any blasting media may be used for the blasting, through alterating the process within the wide range of parameters supported by the machines’ units.
Finish Line is well experienced in commercial running of Alumina, Apatite and Hydroxy Apatite blasting, while other blasting materials’ implementation is in the progress, no obstacles are expected.
Abrasive blasting is used for plowing the implants’ surface to make it rough and porous to increase contact area implant-tissue and to create cavities presumably contributing to osteointegration.
Blasting media particles create cavities all over the implants’ surface, while most of the particles stick inside the metal body of the implants, closing the cavities they created. To remove the particles and to open the cavities, further etching is carried out.
Geometry of the cavities, as well as the fraction of particles trapped in the surface and the strength of their seizure, depend on the blasting parameters, nature and geometry of the particles and type of the metal the implants made of. Immediately after blasting, before opening the cavities by etching, the surface topography of blusted implants looks similar after any kind of blasting.

Anode Treatment

Anode treatment beneficiates metal surface through metal dissolving and oxidation. In case no coating is allowed, Anode Treatment is a way to enhance your parts’ surface qualities. more >>


Passivation is a classic anode treatment to improve corrosion resistance of metals, comparing to not treated parts, through completing natural formation of metal oxides surface layer. more >>

Bright Passivation

Bright Passivation improves corrosion resistance of metals, comparing to not treated parts, removes spots from previous processing and provides the parts with brighter appearance. more >>


Etching is an old craft which technically comprises a vigorous anode treatment process, widely exploited in industry. Etching metal surface as a whole makes it uniformly rough and porous more >>

Color Anodizing

Color Anodizing is a unique Titanium only applied process granting to metal surface a wide spectrum of controllable vivid interference colors, which are stable, uniform and repeatable more >>

Surface preparation

Surface preparation ensures the after Anode Treatment surface features as aimed. It includes both quality improving (like de-burring) and surface beneficiation (like surface roughening) more >>

Surface cleaning

Surface Cleaning is an essential completing operation after any Anode Treatment intended washing the surface from leftovers of previous treatment, using purified water at the end step more >>

Clean Room Packing

Packing in Clean Room class 1000 with laminar cameras class 100 allows us to implement packaging procedure for customers’ products having the highest cleanness requirements more >>